Dave Sherburne NY
Well-known Member
I'm gonna try to put a larger picture on here.
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval013.jpg" target="_blank">
</a>
Well that looks like it worked lets try a rear view
of the engine that drives the blower
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval006.jpg" target="_blank">
</a>
Thats 2 for 2 How about another
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval010.jpg" target="_blank">
</a>
One more of the front U joint.
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval009.jpg" target="_blank">
</a>
Well, thanks to James Howell I think I can post a
larger picture. I bought the blower which was new
at a consignment auction its an MTD same as used
a Cub Cadet. The 2 CC used blowers at the auction
went for over $100 I bought the new black one for
$75 The PK goes to fast in first gear to run a
blower off the tractor engine so I mounted a Ford
garden tractor engine on the rear to run the
blower with a PTO shaft. Finally got a chance to
try it yesterday with 18" of wet snow in Central
NY. It would blow it but not very far or fast.
After the first slow pass I cut back to about a
12" cut then I could blow it without stopping and
waiting for it to clear. Took to long to do the
pile the state plow pushed into the end so I used
the MF 35 on that part.
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval004.jpg" target="_blank">
</a>
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval013.jpg" target="_blank">
Well that looks like it worked lets try a rear view
of the engine that drives the blower
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval006.jpg" target="_blank">
Thats 2 for 2 How about another
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval010.jpg" target="_blank">
One more of the front U joint.
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval009.jpg" target="_blank">
Well, thanks to James Howell I think I can post a
larger picture. I bought the blower which was new
at a consignment auction its an MTD same as used
a Cub Cadet. The 2 CC used blowers at the auction
went for over $100 I bought the new black one for
$75 The PK goes to fast in first gear to run a
blower off the tractor engine so I mounted a Ford
garden tractor engine on the rear to run the
blower with a PTO shaft. Finally got a chance to
try it yesterday with 18" of wet snow in Central
NY. It would blow it but not very far or fast.
After the first slow pass I cut back to about a
12" cut then I could blow it without stopping and
waiting for it to clear. Took to long to do the
pile the state plow pushed into the end so I used
the MF 35 on that part.
<a href="http://s833.photobucket.com/albums/zz257/DaveW11c0/?action=view¤t=SnowRemoval004.jpg" target="_blank">