Repair and service time pics

kyhayman · Feb 23, 2010

Time to fix that pesky oil pan gasket. New engine and I cut corners on the oil pan gasket.... Now get to change it, and pull the front end to get to it.......

Oil change time.....

Might as well change the blades, adjust the belts, and grease the cutter bar too...

This was the last one, had to do a rear split....

showcrop · Feb 23, 2010

I take it ya sprung for the $89.00 gasket. I put the twelve dollar gasket in mine last spring. No problems so far, and it took a real bad jarring one time. I used permatex sealer on it because I figured it needed to be able to "work" a little with the stress it gets. Whats the chair for? Knees get a little sore? I got one with no cartilage. I got the guy at the transfer station watching for a broken office chair for me so that I can roll around and adjust height to the job.

Lou from Wi. · Feb 23, 2010

Was about to ask you where did you get the chair. I use one exactly like it. Hard on the rear end of a 75 year old duffer. Works though.!!
dirt and all lol.LOU

RayP(MI) · Feb 23, 2010

Any possibility you can get to the pan bolts without pulling front end? Try tightening them a bit - may be enough to solve your leak without a major teardown.

Repair and service time pics

kyhayman

Well-known Member

showcrop

Well-known Member

Lou from Wi.

Well-known Member

RayP(MI)

Well-known Member

Similar threads