Ive replaced a block heater three times in the last few months ( Farmall 560D )...dealer covered all three but i'm beginning to wonder if there is a bad lot of them out there ...
All three were installed as per directions, oriented right, .....and water was checked and petcock drained for a few seconds to insure it was in water when first plugged in.....all three worked first time plugging in...second time they fizzled for a little then an hour later it wasnt working.....on the last one I used a multimeter to check ohms and it read 24 -- 25 ...before installing...now they are dead.
Anybody else experiencing these problems??
All three were installed as per directions, oriented right, .....and water was checked and petcock drained for a few seconds to insure it was in water when first plugged in.....all three worked first time plugging in...second time they fizzled for a little then an hour later it wasnt working.....on the last one I used a multimeter to check ohms and it read 24 -- 25 ...before installing...now they are dead.
Anybody else experiencing these problems??
