O/T Toyota and Datsun rims

old · Dec 30, 2009

Well I have this 1990 Toyota corolla SR5 car that need a rim for the spare. I still have this old 1974 Datsun B210 with good rims and want to know if any of you know if the rims for one will fit the other?? Or maybe even a rim from a Mazda GLC since I also have one of those out in the junk yard area. Ya I have to much such but it is nice at times to have junk laying around.
Thanks just hope some one knows so I do not take a rim off just to find out it does not fit

JDemaris · Dec 30, 2009

The Corolla has a four lug X 100 mm pattern and the Datsun won't fit (it has a 114 mm pattern).

The Mazda DOES have the 100 mm pattern, so if the wheels are four lug, they'll probably fit. The offset might not be the same but might fit fine for a spare.

keh · Dec 30, 2009

Try them on the car and check carefully the center hole. I rigged a spare on one of the rice burners by cutting out the center hole a little, which weakens the rim making it suitable only for emergencies.

KEH

old · Dec 30, 2009

Guess you missed my point. Ya I can try them but that means a lot of work and it is both cold and wet out. I was hoping some one would know so I would not have to take the time and work it takes to pullthem off and try them

jose bagge · Dec 31, 2009

These are all 4 lug rims- so measure from one hole across to the other. Your old Datsun should be 4 x 4.5"...if that Toyota is RWD it's the same, front wheel drive it's 4x100MM... That Mazda should be 4x100 or 4x110mm.

Tape measure is your best freind in this one

O/T Toyota and Datsun rims

old

Well-known Member

JDemaris

Well-known Member

keh

Well-known Member

old

Well-known Member

jose bagge

Well-known Member

Similar threads