how to check oil on a case sc

Chris Statz · Dec 22, 2009

I just bought a case sc and was wondering in how i would go about checking/changing/adding oil cause i cant find a dipstick or a place to add the oil thanks

DAO · Dec 22, 2009

you should have 2 plugs in the side of the oil pan the higher plug is the full level the low is the add mark.

greygoat · Dec 23, 2009

DAO is correct, but the "old timers" put small
petcocks in place of the plugs--just open and
close to check oil level!

Anonymous-0 · Dec 23, 2009

You add oil at the governor; in front of the magneto or distributor there is a cap which you remove.
Get yourself an owners manual.

Dutchman · Dec 23, 2009

Everbody is RIGHT on what they said ... I just want to add ... When you drain the oil , there is a plug under the clutch area .. it useually a pipe plug { sq. head } you will get some oil from there { it's a wet clutch } ...
After draining put oil in the eng. like Tom said ...
DON'T were about the oil in the clutch ... it will get there ... after running awhile check the oil level and add some if need too...

Mark

Dutchman · Dec 23, 2009

Everbody is RIGHT on what they said ... I just want to add ... When you drain the oil , there is a plug under the clutch area .. it useually a pipe plug { sq. head } you will get some oil from there { it's a wet clutch } ...
After draining put oil in the eng. like Tom said ...
DON'T were about the oil in the clutch ... it will get there ... after running awhile check the oil level and add some if need too...

Mark

Anonymous-0 · Dec 23, 2009

Look in the tool box, if your really lucky theres a flat iron wrench punched with a square hole in one end that fits the check plugs and open ends for turning the drain plugs.

how to check oil on a case sc

Chris Statz

New User

DAO

Member

greygoat

Well-known Member

Anonymous-0

Well-known Member

Dutchman

Well-known Member

Dutchman

Well-known Member

Anonymous-0

Well-known Member

Similar threads