Average hyd pressure

Aowner · Dec 19, 2009

About what is the typical hyd pressure on a tractor (remotes).

buickanddeere · Dec 19, 2009

1200psi or 2250-2500psi. Enough difference to fail the seals on low pressure equipment.

Russ from MN · Dec 19, 2009

Anywhere from 750 to over 3000, what kind of tractor?

BigMarvfromGa · Dec 20, 2009

You probably need the shop manual to be accurate.

Aowner · Dec 20, 2009

Was going to buy a set of guages and wanted to be in the ball park.

Anonymous-0 · Dec 20, 2009

Is it for a specific tractor? To be safe, get a 4000 psi gauge. You'll probably never come close to that but a good gauge will still read lower pressure. To test a hydrostatic transmission you'd need a higher pressure gauge. Dave

paul · Dec 20, 2009

And AC had their 3000psi high pressure setup for a while, which blew everyone away. Literally.

--->Paul

RodinNS · Dec 20, 2009

~2500 give or take a bit. Older will generally be less. Newer will range up to 2750 and mabey even 3000 psi...

Rod

greygoat · Dec 23, 2009

A pressure gauge is most accurate at the mid
position. Thus a 4000 psi gauge for a 2000 to
3000 psi system!

Average hyd pressure

Aowner

Member

buickanddeere

Well-known Member

Russ from MN

Well-known Member

BigMarvfromGa

Member

Aowner

Member

Anonymous-0

Well-known Member

paul

Well-known Member

RodinNS

Well-known Member

greygoat

Well-known Member

Similar threads