I have a 51" SA w/123 gas engine and have over the last few years lost the correct sized belt for the fan to crank pulleys.
I know it was/should be at least 3/4" wide and have narrowed the length down to be between 31 and 34" long. As we are located somewhat in the sticks, running back and forth to find a belt is a pain.
Would anyone here have the correct belt sizes/dimensions?
Much appreciated
LW Hiway
I know it was/should be at least 3/4" wide and have narrowed the length down to be between 31 and 34" long. As we are located somewhat in the sticks, running back and forth to find a belt is a pain.
Would anyone here have the correct belt sizes/dimensions?
Much appreciated
LW Hiway