Kubota Bi-Speed Turn Clutch

Dean · Dec 10, 2009

Has anyone adjusted (shimmed) the bi-speed turn clutch in a Kubota B1750HST.

Mine does not pull like it once did and I would like to adjust it. I do not have a manual for this tractor but know that it is adjusted by shimming the clutch fork actuation shaft.

It appears that it can be done from the outside by removing a small access cover on the right side of the bi-speed gearbox cover but I am not certain.

Any advice before I get into this will be greatly appreciated.

Thanks in advance.

Dean

Dean · Dec 10, 2009

Jerry:

Thanks for your message.

I have owned this tractor since new and know how the bi-speed turn works. The tractor has never had a loader. It is used to mow with a 60" MMM and to plow snow.

The bi-speed turn clutch slips more easily than it did when the tractor was new such that the front tires do not pull strongly (as they did when the tractor was new) when turned near or at lock.

The tractor has 330 hours, has been properly maintained and works properly in all other respects.

Dean

Kubota Bi-Speed Turn Clutch

Dean

Well-known Member

Dean

Well-known Member

Similar threads