Larry in CO
Member
OK, I give up. I"ve got a 91 S10 PU that got to where the starter wouldn"t engage - just whirr. I took the starter out and replaced it. Since then it maybe has started half a dozen times. I can short across the selinoid and it will work but not using the switch. I"ve replace both battery cables and cleaned up the connections. I have bypassed the clutch safety switch and even run a new wire straight from the back side of the clutch safety switch directly to the selinoid. I replaced the ignition switch mounted on top of the steering column. Battery is good and has passed a load test. Durn thing still won"t start. Any and all suggestions are welcome before I resort to more drastic, and destructive measures. BTW, just to keep this tractor related, it's blocking my H in the garage and I can't use it... Thanks, Larry