New Holland 3930 exhaust

Mark Kittrell · Oct 11, 2009

Wondering if anyone makes a shorter profile exhaust pipe for a 3930? I am about 6 inches too tall to get my tractor into the garage.

Thanks.

RodinNS · Oct 11, 2009

Cut the tip off and put a rain cap on it. There are limits tho... the roll bars are still going to catch, or your head if you've removed the roll bars.

Cutting the tip off will come with increased noise tho. The long pipe gets teh racket up above you so you don't notice it as bad... and they are LOUD.

Rod

jimont · Oct 12, 2009

I'm with Rod,re.shortening it. I have the same unit on my 3600. In my case,I'm going to cut a little off the bottom in order to lower to mass of the muffler closer to the manifold, then lopping a foot off the top and installing a rain cap. Will expand the removed top section in order to use it as a replacement exhaust when mowing around low tree branches.

New Holland 3930 exhaust

Mark Kittrell

New User

RodinNS

Well-known Member

jimont

Member

Similar threads