case 830 caseomatic

Anonymous-0 · Oct 6, 2009

hi i was wondering if any one knew the length of the dipstick for the caseomatic and were the marks are mine doesnt have one also do u start moving with the lever down and then pull it back towards you

Anonymous-0 · Oct 6, 2009

I have 800 , take this question to case board ,, if no response from anyone i can give you measurements of my 800 , Which May not be exactly what you need . but IMHO is exact same tranny ., anyway .. start out with lever down ,,once moving at a decent travel , pull up lever to engage direct drive torque covertor lockup,,,. Use around 3 gallons Dextron 3 in torque convertor for easier shifting , Idle engine ...Use the brakes to park on hill ,, This tractor will not stay put in gear with engine off , CASE should had put in a Park PUAL in all their Automatic tractors like DEERE DID !... in weak battery event, I have hill roll started my 800 by shifting into 6th ,locking up torque convertor lever , engaged DECOMPRESSOR and cranked engine while rolling , when you feel tranny engage and match travel for 6th gear , dump the decompressors, and motor will start

Chris830930 · Oct 8, 2009

what are the measuremets its probly the same

Anonymous-0 · Oct 9, 2009

Hey chris , Enter your Email , that way it will come direct to me, just rooted this out Because I noticed You got no bites at Case , STRANGE,,, I will measure 800 and get back to you , Jim

Chris830930 · Oct 12, 2009

my email is [email protected]
thanks alot

case 830 caseomatic

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Chris830930

New User

Anonymous-0

Well-known Member

Chris830930

New User

Similar threads