4020 PTO brake

Anonymous-0

Well-known Member
I have a 1965 4020 with a synchro shift transmission. The PTO seems to work just fine. I noticed today when I pull the PTO lever out that it would almost fall back into the brake position from neutral I know in the past that it would take a little bit of effort to pull it back into brake and it did work. Now in brake position it still takes a little effort to turn the PTO but it’s not locked down. Is there an adjustment for the brake? I have an owner’s manual and an IT manual and there is nothing in it about adjusting the PTO brake. Is this a one step adjustment when the PTO is adjusted?
Mark
 
Oops, NO, but thanks I thought I had posted it here and I did not see it when I came back to the site so I posted it again.

Mark
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top