Anonymous-0

Well-known Member
I have a Hay King hay lift. It is a three point hitch model with a hydraulic cylinder mounted underneath it that raises the round bale up a few feet higher than the three point alone can do. Who besides Hay King makes this type of lift?
 
i dont have any pictures...but I can take some and post them. it is a simple forklift type mast and I used a slide cylinder from a rollback wrecker to do the lifting. it has about 8 ' stoke, if you have dual remotes you can use a small hyd cylinder for the top link and have tilt control too
 
Vermeer made a bale stacker, don't know if they still do. It lifts high enough to stack two 6 foot bales on top of each other. Well built, works good. Handy for other things also.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top