Oliver Super 55 3 Point Hitch

leva · Jul 17, 2009

I bought a Super55 that the 3 Point was set up on due to not useing it for years. Took it all apart and replaced the piston seal and wiper, along with all the other O rings and gaskets. Reassembled acording to ITT manual, but on starting it up, the 3 Point raised with the selector lever in the down position. Now it will not go back down no matter where the lever is. Can anyone PLEASE tell me what I did wrong? I have also posted this on the Oliver Board.Thanks for your help.

rrlund · Jul 17, 2009

I don't remember what the linkage looks like in there for the draft control,but I had my 1850 apart a few month ago and the same thing happened. One of the linkage levers was flipped into the wrong position so that when I moved the lever,it wasn't actually moving the valve on the inside. I had to take another tractor apart to figure it out,but that won't help much if you don't have another one.

Oliver Super 55 3 Point Hitch

leva

Member

rrlund

Well-known Member

Similar threads