1991 ford f 250 brakes

randy1 · Jun 23, 2009

I have a 91 ford f 250 4x4 changed front brakes and left caliber can not get brakes back feel like need bleed . changed master cly. and have put 3-4 gal. brake fluid through whole system bleeding front and rear wheels any sugestions thanks randy

Bob · Jun 23, 2009

Did you "bench bleed" the master cylinder before installing it? If not, it will be a real %$#@* to get all the air out now.

Dick W. · Jun 23, 2009

Does it have rear wheel ABS? The accumulator often needs to be replaced if it has ABS. Is the bleeder on the new caliper at the top of the housing? It needs to be to bleed the air out. I have seen it many times where the wrong side caliper was delivered and that puts the bleeder at the bottom; won't work. Also when you have enough pedal to stop the truck take it on the road and see how it feels. It will likely be good on the road. Those older ABS systems were often hard to get a good pedal after brake work.

1991 ford f 250 brakes

randy1

Member

Bob

Well-known Member

Dick W.

Member

Similar threads