converting generator to alternator

kdt · Jun 2, 2009

I"m converting my D17 AC to alternator. I"ve got the alt. mounted but need some good advice on how to make the switch. It"s a 12 volt neg. ground already, I"m just unsure how to proceed with wiring. Thanks

old · Jun 2, 2009

Need to know what alternator you are using. If it is a good old Delco 10SI they are easy to wire. The big post goes to the hot side of the soliniod the wire on the plug that is marked #2 goes to the big post and the #1 goes to the switch the side that is hot when turned on. You do need a diode or light bulb in the #1 wire or you will not be able to shut off the engine. I use diode 276-1661 radio shack that is there part number

twopop · Jun 2, 2009

gas or diesel?if its diesel you dont need the diode.if you have a universal ignition switch with both ign.and acc.terminals wire the coil to ign. and the alternator to the acc. terminal and you still dont need the diode

converting generator to alternator

kdt

New User

old

Well-known Member

twopop

Well-known Member

Similar threads