I recently picked up a really nice 12" backhoe bucket that I need to identify.
The upper holes are spaced 8-1/8" apart (inside) and the lower holes are spaced 5-1/8" apart (inside). The distance between the upper and lower holes is 14". The top holes are 1-3/4" in diameter and the lower holes are 1-1/2" in diameter.
I had hoped to use this on my Case 530 backhoe but the upper hole spacing is to small and the diameter is to large.
I'm either going to have to modify it to fit my 530 or else trade/sell it and get the right one.
Any ideas on what this bucket might fit?
Thanks,
Brad
The upper holes are spaced 8-1/8" apart (inside) and the lower holes are spaced 5-1/8" apart (inside). The distance between the upper and lower holes is 14". The top holes are 1-3/4" in diameter and the lower holes are 1-1/2" in diameter.
I had hoped to use this on my Case 530 backhoe but the upper hole spacing is to small and the diameter is to large.
I'm either going to have to modify it to fit my 530 or else trade/sell it and get the right one.
Any ideas on what this bucket might fit?
Thanks,
Brad