Hydraulic on IH1466 help

Walt7777777 · Apr 21, 2009

I have IH 1466 and I am only getting 2000 PSI out of the couplers in the back. I replaced the hydraulic pump a year ago, manual shows a by-pass valve at 2000 PSI and another at 2500 PSI. I can"t tell what is in it now, I assume a 2000 PSI, is it possible to change the by-pass valve from 2000 to 2500 without damage to something else?

Any help or comment appreciated.

Thanks,

Walt

the tractor vet · Apr 21, 2009

Yes you can change it to the 2500 . As i have changed out several for customers that needed more pressure .

Walt7777777 · Apr 21, 2009

Thanks appreciate the response!

Owen Aaland · Apr 21, 2009

(quoted from post at 03:18:58 04/21/09) I have IH 1466 and I am only getting 2000 PSI out of the couplers in the back. I replaced the hydraulic pump a year ago, manual shows a by-pass valve at 2000 PSI and another at 2500 PSI. I can"t tell what is in it now, I assume a 2000 PSI, is it possible to change the by-pass valve from 2000 to 2500 without damage to something else?

Any help or comment appreciated.

Thanks,

Walt

The pressure rating should be stamped on the end of the valve.

You will be increasing the pressure by 25%. Sometimes the O-ring between the rear frame and the pump cover will blow out.

caterpillar guy · Apr 21, 2009

What can't you lift with 2000 psi that you need to lift with 2500?

Hydraulic on IH1466 help

Walt7777777

Member

the tractor vet

Well-known Member

Walt7777777

Member

Owen Aaland

Well-known Member

caterpillar guy

Well-known Member

Similar threads