(800) 853-2651
SHOP NOW

Farmall 460 w/ hydra-touch issues

A

Anonymous-0

Well-known Member
I have problems with the 3 point. when it gets to the selected height it drops +/- 1" then raises to the correct height and does this over and over at any selected height. New lift cylinder,new pump,new inlet filter,new fluid and still the same issue. I'm lost ? Is it the block valve under the seat ? or ? I have hydra-touch valves in a row, 2 with Dual/single cylinder adjustment pins and the one for the 3 point has no adjustment for dual/single but is connected to the draft control rod which works well and I don't think thats a draft control problem as it seems to respond well. HELP !!! Darrin at [email protected] or 719-331-1759 colorado
 
Is the linkage wore out on the lift lever?

Make sure all the linkage is tight from the lever down to the valve.

Gary
 
The check block under the seat can cause this problem. Are the hoses from the cly to the check block in the right ports? There are 4 ports on the back. The 2 farthest apart up & down are the ones the hoses hook up to. As you stand behind the tractor the inside hose off the cyl goes to the top port on the check block. The spool in the tele-depth valve relys on the check block to hold the cyl where you stop it,unlike the other 2 remote valves. The valve spool holds the remote cyls up.
 
Thanks Guys for the info. I'll check the linkage from the valve to the handle. The hoses are in the right locations, if you switch them it gets real funky ! It has a mind of its own !!! I bought a new spring and check ball and O-rings for the block valve today and will try it tonight. Let you know what happens. THX Darrin
 
You must log in or register to reply here.

Similar threads

hdokes
'60 D6b steering issues
Replies
8
Views
582
hdokes
hdokes
H
IH 424 Diesel
Replies
4
Views
504
Heckathorn
H
D
2N hydraulic fork wear 9N540
Replies
0
Views
240
Dave G9N
D
N
4000 SU lift problems
Replies
0
Views
223
newfarmer 4000SU
N
N
1975 ford 4000SU hydraulic help needed
Replies
2
Views
293
newfarmer 4000SU
N
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top