Toy Tractor Forum

doorman

Member
Is there a toy tractor forum where I can ask some questions about a couple of toy tractors I have? I have asked about them at tractor shows and the dealers said they had never seen these particular models. thanks for any help. doorman
 
I have the following 1/16 sale tractors; JD "B", Ford "Jubilee", and Ford "N". I'd like to get models of a Massey Ferguson 65 low profile, a WD Allis Chalmers, and a D17 Allis Chalmers. These last 3 were what we used on the farm on which I grew up. My grandpa had a JD "B" and I presently have and use a '46 Ford 2N.
 
My collection isn't all that big,about 300 1/16ths and some pedals. There's a boatload of 1/64ths in the toy room too that belong to the boys. Things they had when they were kids.
 
I have a 901 type Ford, I'm not sure of the scale, it is probably 1/16 or so. There are no mfg. markings that I can find. It has a three point hitch operated by a lever. A toy dealer at the Tunica Pull said he had never seen one and didn't know if it was a dealer giveaway.
Thanks for all replies. doorman
 
I also have an IH 340 Utility, a JD 4020 narrow front, and a JD combine (not sure of model) all are probably 1/16. doorman
 
That 901 Ford is probably a 1/12 scale Hubley. The combine,if it's a pull type with a cloth canvas,a model 12A by Carter. There was a red version decaled as a Tru-Scale. The narrow front Deere,a 3010 or 3020 by Ertl. There were about 16 different variations of it. Different filter configurations,wheels etc. The IH,most likely Ertl. If it's a narrow front,most likely a 504.
 
If you go to the toy tractor times website, they have a forum there that can be very helpful with the older toy tractors. Everyone is there because they collect farm toys, so there is a lot of collective knowledge.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top