ford 600

mikejk · Dec 31, 2008

I did a tune up on my 600 ford , points,con.cap wires,plugs.When I tried to start it , it wouldn't start. (I have spark to the plugs)but it won't start

old · Dec 31, 2008

Are you sure you got the plug wire back on the new cap in the correct order?? Or did you just pull all the wires off and then put them back on any which way?? If you don't have them on correctly then that is your problem
Hobby farm

NewbieFordGuy · Dec 31, 2008

Did you check to be sure that the plug wires weren"t switched? Did you put the clip back on the shaft that holds the rotor in place? Since you say that you are getting spark to the plugs, you must have put the rotor back in. I"ve forgotten that a time or two.

Jerry Coulter · Dec 31, 2008

Does it pop or anything? Put the old plugs back in and try it. Let us know how this turns out.

mikejk · Jan 2, 2009

Hi .it turned out to be the condenser

mikejk · Jan 2, 2009

Hi ,it turned out to be the condenser

mikejk · Jan 2, 2009

Hi,It turned out to be the condenser

ford 600

mikejk

New User

old

Well-known Member

NewbieFordGuy

New User

Jerry Coulter

Member

mikejk

New User

mikejk

New User

mikejk

New User

Similar threads