International 350 Utility Heater installation

rhino

New User
I just bought one of those Kat's 1000W heaters for my 350U. Question is what is the best way to run the inlet/outlet lines? There is a plug behind the carbuerator that I assume should be the inlet to the heater. There is also a drain on the bottom hose of the radiator I could plumb into the inlet of the heater. Where is the best/easiest place to plumb in the outlet side of the heater? Hose between the top side of the radiator and the thermostat, hose between the thermostat and water pump, somewhere even easier?
Thanks - Ryan
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top