Allis-Chalmers CA Rt. rear axle

wolfgang50 · Dec 25, 2008

Does anybody know......the Allis CA has that notorious Lambert clutch on the rt rear axle, is there any thing that can be done to change that to a straight axle? Like maybe insert the axle from a model "C". Would like to know if any of you "ole" farmers know of something.

DickL · Dec 25, 2008

I have read on Allis Chalmers boards where the C pinion shaft was used. I have both parts tractors here but have not compaired the two pinion shaftes myself. The left side pinion shaft from a CA parts tractor would work. My one CA parts tractor has solid pinion shafts both sides.

wolfgang50 · Dec 25, 2008

Hi DickL.....would you be able to check that for me. If that is the case I would love to purchase a used "C" rt pinion. Thanks

Wild Bill · Dec 25, 2008

you can replace it with an axle from a c, or a left hand axle from a CA. Or you can bolt the clutch housing halves together....or you can repair the clutch, that thing is handy!

pat sublett · Dec 25, 2008

I would fix the clutch. They are very handy and work well if you keep the dirt out of them.

Mark · Dec 25, 2008

None of my business, but it seems as if you have decided to rid yourself of that @^*! hand clutch once and for all. Well, it"s not that much of repair...did it myself several years ago and I think if you had a reliable working hand clutch, you"d come to appreciate it. I"d repair it if it were me.

Allis-Chalmers CA Rt. rear axle

wolfgang50

New User

DickL

Well-known Member

wolfgang50

New User

Wild Bill

Member

pat sublett

Well-known Member

Mark

Well-known Member

Similar threads