flinthillswillie
New User
Got done moving snow this morning with my case 1825 and while letting it idle for a while before shut-down I thought it was making a little noise. The fan and fan pully are loose. It's well below 0F so I did not spend a lot of time looking at it but it looks like the entire radiator and shroud need to come off to get to the fan and pully bolts. I am hoping the bolts on the pully are loose and just need snuged up. If I need to remove the radiator I'd just about put a new water pump and belt on the thing. In fact that might be what it needs. And if so can I get the water pump off without removing the radiator? Most of the time I would have found this after it puts a hole in the radiator. It has the Kubota diesel motor. Thanks for any help. willie