Replacing old mounted harrow

70Deere · Dec 8, 2008

I am looking for a new mounted harrow for my culivator and trying to find the best one that will break up the colds and won't plug up. I have been looking at Wingfields flexible harrows, Remlinger 3 bar spring tine with single roller combination harrow, 3 bar roller flex harrow, double roller harrow. I was wondering which you liked the best or if you had another type that you thought would be better and will leave a level suface with out clods and won't plug up?

Remlinger Mounted Harrows
http://www.remlingermfg.com/Mounted_Harrow.htm

Wingfields Flexible Harrows
http://www.wingfields.com/mounted.htm

thurlow · Dec 8, 2008

Used a Hiniker harrow behind a field cultivator for a loooooong time, before we went to.....mostly.....notil, planted right behind it.

Doc 2 · Dec 8, 2008

The Remlinger 3 or 4 bar spring tooth is not of the best quality. We had a 4 bar on a chisel plow and the teeth would break regularly and fall of. Then after a period of time the frames began breaking around where the teeth mounted. It may survive better behind a field cultivator with smaller dirt lumps, but I would look for a heavier duty alternative.

jd-tom · Dec 8, 2008

We have a Farm King 3-bar coil-tine harrow behind our disk and it works well. Pretty heavy built and with the longer teeth and the fact it is adjustable, we very seldom plug it up.

Replacing old mounted harrow

70Deere

Member

thurlow

Well-known Member

Doc 2

Member

jd-tom

Member

Similar threads