Over the last few years I’ve been pumping out fuel oil tanks in people basements and salvaging the oil after they convert to some other type of heat. This past weekend I bought a nearly new 200-gallon pressure tank at an auction for $40. My idea was to hook a vacuum pump of some sort to it and vacuum the oil out of the tanks rather than hauling a pump into the basement every time. Just thought it would be easier and less of a mess and hassle.
I know very little (read that as nothing) about vacuum pumps. Any ideas as to what to look for in a pump or what kind of capacity or size I would need to get? Probably start looking on Ebay but not sure what I would need to look for. Any and all advice welcome!
Thanks
Tim
WWW.TIMWAFER.COM
I know very little (read that as nothing) about vacuum pumps. Any ideas as to what to look for in a pump or what kind of capacity or size I would need to get? Probably start looking on Ebay but not sure what I would need to look for. Any and all advice welcome!
Thanks
Tim
WWW.TIMWAFER.COM