JD H Starter Removal 1941

Larry D. · Oct 18, 2008

Fellas; I thought it was a Snap to remove the Delco Starter from My H But I was Mistaken, Seems like theres not enough Clearance between the Fan Shaft and back of the Starter, Am I missing something here, or does the fan shaft have to come out of the Housing, If in fact it does PLEASE EXPLAIN any Complications I might run into,(with this Shaft removal) Thanks! Larry

BLinWMI · Oct 18, 2008

Just unbolt the starter bracket from the side of the crankcase, then the starter and bracket can be lifted straight up.

Larry D. · Oct 18, 2008

Thanks for reply, There IS alot of Grease/Dirt Buildup on this Original tractor, Are You saying take the Flywheel COVER off,BUT I didn't See any other stuff to take off referring to unbolting from crank case, please explain more ?? thanks alot Larry

Larry D. · Oct 18, 2008

Thanks for reply, There IS alot of Grease/Dirt Buildup on this Original tractor, Are You saying take the Flywheel COVER off,BUT I didn't See any other stuff to take off referring to unbolting from crank case, please explain more ?? thanks alot Larry

Hoss In ME · Oct 18, 2008

I just unbolt the bracket the starter is bolted to and lift the whole works off. Hoss

Larry D. · Oct 18, 2008

THANKS! Blinwmi... You were Exactly Right,, Really this thing has about 2Inches of crap on it from about 60Yrs.. But I finally saw those Three Bolts and all's well, Thanks again Larry

JD H Starter Removal 1941

Larry D.

Member

BLinWMI

Member

Larry D.

Member

Larry D.

Member

Hoss In ME

Member

Larry D.

Member

Similar threads