caterpillar D4D In need of parts

jack freeman · Oct 14, 2008

I have a cat D4D I need a pin for the blade I can only find a few numbers
back of blade mount 2J1070X
serial plate on left side of fire wall area 65J1117
5A6050X
5A3016X

anyone have any ideal what these numbers are mainly the tractor model
the pin I need goes into the C frame and the butts up to the blade

Anonymous-0 · Oct 14, 2008

A heavy equipment parts depot will be able to help you out. You can probably get aftermarket. I know you can for D6's and 7's. There was probably only a couple different blades available on a D4D. Dave

Anonymous-0 · Oct 14, 2008

The 65J1117 is a 60 in. gauge 1972 model with Direct Drive and D330 engine.
The blade pin is part #2J1067
The C-frame pin is part #5F1401

These same pins were used on lots of models.

GeneMO · Oct 14, 2008

Go to the local Cat dealer. They still have parts for my ole 1950 model D-2

Gene

jack.freeman25 · Oct 23, 2008

REGAL CORPORATION HAD THE 5F1401 PIN FOR $74 NEW, CAT CLASSIC WANTED OVER $500 AND CAT AFTER MARKET WANTED $220 IT LOOKS EXACTLY THE SAME. I"LL PUT IT TO THE TEST AND FIND OUT IF IT HOLDS UP THANKS FOR THE HELP GUYS
http://www.regalcorp.com/

1800-824-2164

caterpillar D4D In need of parts

jack freeman

New User

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

GeneMO

Well-known Member

jack.freeman25

New User

Similar threads