farmallman
Member
My brother bought this plow from his uncle. I have been helping him to get it ready but i cannot get the plow shares to fit properly. I was hoping some of you people could help. Thanks.
<img src = "http://photos-d.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281155_7331.jpg">
This is the share that came with the plow.
<img src = "http://photos-f.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281157_7968.jpg">
This is the backside.
<img src = "http://photos-g.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281158_8502.jpg">
This is the only IDing feature on the plow at all. Other than the CASE stamped on the frame.
<img src = "http://photos-h.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281159_8836.jpg">
This is the frog that the share is supposed to bolt to.
<img src = "http://photos-a.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281160_9151.jpg">
This is the moldboard and the frog.
<img src = "http://photos-b.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281161_9459.jpg">
Front View
<img src = "http://photos-c.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281162_9833.jpg">
Left hand side
<img src = "http://photos-d.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281163_156.jpg">
Right hand side.
Any help or advice or pointers would help.
Thanks in advance!!!
<img src = "http://photos-d.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281155_7331.jpg">
This is the share that came with the plow.
<img src = "http://photos-f.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281157_7968.jpg">
This is the backside.
<img src = "http://photos-g.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281158_8502.jpg">
This is the only IDing feature on the plow at all. Other than the CASE stamped on the frame.
<img src = "http://photos-h.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281159_8836.jpg">
This is the frog that the share is supposed to bolt to.
<img src = "http://photos-a.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281160_9151.jpg">
This is the moldboard and the frog.
<img src = "http://photos-b.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281161_9459.jpg">
Front View
<img src = "http://photos-c.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281162_9833.jpg">
Left hand side
<img src = "http://photos-d.ak.facebook.com/photos-ak-snc1/v311/51/39/510337692/n510337692_1281163_156.jpg">
Right hand side.
Any help or advice or pointers would help.
Thanks in advance!!!