Case Flat belt pulley Picture

old

Well-known Member
Number on it is G1038, has a 4 bolt mount flange with 4 inch center to center holes. So does this help any so maybe I know what it will fit. Sorry pictures not very good but hey the cam I used is a Wal mart $14 one so its china junk
v6124.jpg

Hobby farm
 
Try sitting the camera in a vice or something to keep it from shaking even a little. I think it is threaded too for that purpose.
 
It is for a late VAC Case that came with eagle (3 pt) hitch. It may fit a 200b 300b etc as well . I have a 54 VAC with a pressed steel pulley. most of the older case pulleys were cast. the set screw locks it in place with the gears engaged. with the screw loose, it could be pulled outward to disengage. the assembly slides an inch or so within the outer housing.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top