What Wheel Weights Would Fit The Home Made Studs?

8NChris · Dec 7, 2023

The weights that bolted up here would be a 3 or 6 hole pattern. Right at 12 center to center. Do you know what weights I should look for?
Thanks, Chris

8NChris · Dec 7, 2023

Photos

sandcastle1 · Dec 7, 2023

photos would help

old-9 · Dec 7, 2023

These are the best, eazy to add or remove, as needed. Ford and aftermarket axle weights are also great, out of the way and add 300 pounds. However the axle weights are very hard to find. joe
here

8NChris · Dec 7, 2023

No joke. Reminder to let them upload before posting.

BarnyardEngineering · Dec 8, 2023

Everything Attachments has listings for various wheel weights including dimensions.

What I would do is find a good deal on some wheel weights and modify the stud locations to fit. It's going to be easier quicker and cheaper than trying to figure out what the previous owner was thinking and replicate it. You know the wheel weights you'll need to fit that are going to be the most expensive and rare ones known to man... You just know it...

Bob Bancroft · Dec 8, 2023

Lone Star Weights has a great website with many weights shown, with dimensions listed.

Leroy · Dec 8, 2023

To me something is wrong in that add. I have both a 9N and a 2N and the weights shown and listed to fit the 9N and 2 as well as the 8N and newer tractors. No way would the pie weight fit all those models especially the 9n and 2N. 8N yes 9N and 2 N NO. With that add I would hesitate to buy anything from that company.

8NChris · Dec 8, 2023

(quoted from post at 07:25:37 12/08/23) Everything Attachments has listings for various wheel weights including dimensions.

What I would do is find a good deal on some wheel weights and modify the stud locations to fit. It's going to be easier quicker and cheaper than trying to figure out what the previous owner was thinking and replicate it. You know the wheel weights you'll need to fit that are going to be the most expensive and rare ones known to man... You just know it...

ould be but then again I may find them at the scrap yard.

8NChris · Dec 8, 2023

(quoted from post at 20:02:10 12/07/23) These are the best, eazy to add or remove, as needed. Ford and aftermarket axle weights are also great, out of the way and add 300 pounds. However the axle weights are very hard to find. joe
here

ight but for the time being I am just looking for what would fit these studs. Thanks

old-9 · Dec 8, 2023

Leroy, You are correct, I caught that also. His photo does show an 8-N lug pattern though. Joe

What Wheel Weights Would Fit The Home Made Studs?

8NChris

Member

8NChris

Member

sandcastle1

Member

old-9

Well-known Member

8NChris

Member

BarnyardEngineering

Well-known Member

Bob Bancroft

Well-known Member

Leroy

Well-known Member

8NChris

Member

8NChris

Member

old-9

Well-known Member

Similar threads