Wisconsin V461D

I am not getting enough oil on the overhead valve assembly for the Wisconsin V461D engine out of my Case skidsteer. The issue is the same for all 4 heads. I am not sure how the oil gets to the overhead assembly. There is 50 # oil pressure on the gauge and there is oil in the galley on top of the block. Help!!!
 
I would start by checking the oil level then a check on the gage for being accurate then looking for oil flow if only an ooze to the top and finally if things are running dry or just getting a wee bit of oil. I'm not at all familiar with a Wisconsin engine so best of my ideas.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top