Ford 4100 power steering problem

Antyk · Oct 22, 2023

Hi I have pulled the control valve apart for the power steering for the above tractor and found that one of the special plungers that has horns has got 1 horn broken off. Can someone please tell me if I put it back in like this will I have flow issues. I can not seem to find a replacement one.

This post was edited by Antyk on 10/21/2023 at 10:23 pm.

used red MN · Oct 22, 2023

Hello Antyk welcome to YT! In the link type 4100 in the
search and select the year range you have. Then go to
the Steering section and find the diagram that matches
what you have. Then tell us the part number.
If you were trying to post a picture here are some
instructions for that. Pictures post through the
..Browse or Choose files.. button just below where it
says ..Upload Photos/Videos.. down lower in the ..New
post and reply windows. Clicking that will give you a
choice to select the file or folder the pictures are
stored in on your PC or phone. Then select the photo
from the file and ..Add.. it. They cannot be pasted into
the text area as a file.
CHNI online parts catalog

Antyk · Oct 22, 2023

(quoted from post at 15:51:19 10/22/23)

It is a Ford 4100 with power assist steering from the mid 1970's.
You can see in the photo one of the plungers has a piece missing.

This post was edited by Antyk on 10/22/2023 at 12:18 am.

Antyk · Oct 22, 2023

Blackhole49 · Oct 22, 2023

Can't answer your specific question, but, if it was working before you pulled it apart, it should
work back together.

Ford 4100 power steering problem

Antyk

New User

used red MN

Well-known Member

Antyk

New User

Antyk

New User

Blackhole49

Well-known Member

Similar threads