Landini vision 105

Tractorguy1977 · Apr 21, 2023

I had a deal to purchase a estate in which had many tractors. One of which is a 2006 landini vision 105 with buhler loader. Tractor is in very good shape only 912 hours on the ticker!
Got it home and want to service it and get it to work. Upon checking things over I examined the pto shaft (while engaged and engine running )you can see directly in the housing and oil being sloshed around a little bit. (Not good) pulled the 3 bolt end cap off and no seal of any kind... drained fluids nothing abnormal came out. Used a inspection cam and it seems pretty clean inside.
I have been looking all over for a seal or breakdown diagram to find a part # or anything with not many results.
Anyone?

Muir hill 101 · Apr 22, 2023

.
Landini tractor dealer USA

cjunrau · Apr 22, 2023

landini parts come through agco around here I would try an agco dealer

Tractorguy1977 · Aug 2, 2023

I know it's been a while , I am still not able to track down the proper pto shaft seal on the 3 bolt cover plate. I went to a local service place to try and track down a seal using a mic and measurements. Isn't going well in my favor.
If anyone may have a part number , diagram , or what to look for !??
This tractor has a 3 bolt cover plate that holds a seal of sorts. (There is a threaded area like a seal may screw in? Or a pto cover perhaps?)

DoubleO7 · Aug 3, 2023

Have you tried finding the seal online?

If you google:

Oil seals by size

There are several places where you plug in the bore, shaft and thickness to whittle down to all types available.

The one you want is likely metric.

Once you find a few that would fit you can then use the part numbers and do a cross reference to the brands you can get locally if desired.

This post was edited by DoubleO7 on 08/03/2023 at 06:59 am.

Landini vision 105

Tractorguy1977

Member

Muir hill 101

Member

cjunrau

Well-known Member

Tractorguy1977

Member

DoubleO7

Well-known Member

Similar threads