what type of hyd. fitting is this

steven in Tn · Jul 14, 2023

this is on a westendorf loader. hose has sprung a leak i have a brand new npt hose i would like to use if i can get the correct adapter.
the thread size is 3/4

Jim.ME · Jul 14, 2023

That looks like the type of compression fitting often used with industrial tubing. I would check with an industrial supplier of tubing and fittings for an adaptor to NPT.

caterpillar guy · Jul 15, 2023

Just a guess but if it measures 3/4 then I would hazard a guess of 3/4-16. Hard to see in the picture

r.w.b. · Jul 15, 2023

might be some british fitting.
reason i say that,had a hose break on a westendorf. fitting bad in
cylinder.fitting welded in cyelinder and is british standard pipe
threads. sadly that soured me on westendorf loaders.
it ended up costing a bundle to repair it

wore out · Jul 15, 2023

https://www.discounthydraulichose.com/27255-flareless-x-nptf-female-pipe.html

Here's the 1/2'' X 1/2'' version, lots of other sizes, as well.

You would not use the nut and crimp sleeve/ferrule, as there is already a set on your steel line.

steven in Tn · Jul 15, 2023

(quoted from post at 09:28:59 07/15/23)

https://www.discounthydraulichose.com/27255-flareless-x-nptf-female-pipe.html

Here's the 1/2'' X 1/2'' version, lots of other sizes, as well.

You would not use the nut and crimp sleeve/ferrule, as there is already a set on your steel line.

Click to expand...

thanks for everyones help and wore out i think that is the fitting that i will need just in the 3/8npt version. thanks again for all the help

what type of hyd. fitting is this

steven in Tn

Member

Jim.ME

Well-known Member

caterpillar guy

Well-known Member

r.w.b.

Well-known Member

wore out

Well-known Member

steven in Tn

Member

Similar threads