(800) 853-2651
SHOP NOW

Agricat 454 no drive

A

andrew87

New User
So last week I carried out a service and replaced some hydraulic lines on my tractor, after I was finished, I started it and it fired straight away the hydraulics all work but it has no drive, I've tried everything I can think of and checked over everything but just can't get it to move. I can select gears, hi and low and the shuttle shift selects too is there something I am missing?
any help advise would be appreciated.
 
Hello Andrew welcome to YT! I can tell by several
phrases you used you are probably not from North
America. Best I can figure is that you are in Australia
because it looks like the Agircat tractors were
imported there. There is very little info on your tractor
on the web. I cannot even determine if it is a wheeled
tractor or a tracked machine. I believe it is the later
and is about 45 hp. Best I can determine is that you
possibly drained a gear case and you thought filling a
centralized hydraulic reservoir would refill it but it has
separate filler unknown to you. That is the best I can
do for you.
 

Thank you for your help. I can confirm that I filled the gearbox/diff with oil as well as the hydraulic fluid.

It has me perplexed as to what the cause is.
 
(quoted from post at 04:50:44 06/30/23)
Thank you for your help. I can confirm that I filled the gearbox/diff with oil as well as the hydraulic fluid.

It has me perplexed as to what the cause is.
Click to expand...

Nobody is doubting that you filled what you believe are all the places to fill with oil. Just suggesting that maybe you missed one that you're not aware of.

For the record I do not have any specific knowledge of your tractor, just general ideas. You mentioned a shuttle shift. It is probably hydraulically operated. In replacing whatever lines you replaced, you may have either crossed some lines up, OR "lost prime" to the shuttle, as in there is air in the line that operates the shuttle.
 
(quoted from post at 04:50:44 06/30/23)
Thank you for your help.


" I can confirm that I filled the gearbox/diff with oil as well as the hydraulic fluid. "





Probably not




It has me perplexed as to what the cause is.
Click to expand...
 
You must log in or register to reply here.

Similar threads

O
  • Question
Ford 3550 shuttle shift issues
Replies
0
Views
119
Oldford 3550
O
W
Hydraulic Drive Problem
Replies
8
Views
607
wgraves
W
A
long 2610 fuel problem
Replies
4
Views
220
Hemmjo
Hemmjo
T
TL100DT Shuttle shift Problem
Replies
1
Views
229
Jim.ME
J
F
Farmall 706 won't move lost steering.
Replies
7
Views
796
rustred
rustred
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top