Trying to mount a new holland 70 thrower on a 273 baler.

Crookedcreekjerseys · May 22, 2023

Im having trouble trying to mount the front portion of the
drive shaft on the flywheel portion of the baler. I cant figure
out how it bolts up. Pictures would be greatly appreciated if
someone has the same baler with a kicker already mounted.

BarnyardEngineering · May 23, 2023

Speaking generally here, if it's not obvious how it bolts up, it may not bolt up. Unless it came off the same model baler, it's likely that the mounting brackets are different, and you don't have the correct ones for your baler.

SHALER · May 23, 2023

I think you may have an easier time putting a marshmallow in to a parking meter. The 54A thrower is for a 273. A 70 should be too long.

chuck2015 · May 23, 2023

(quoted from post at 19:57:14 05/22/23) Im having trouble trying to mount the front portion of the
drive shaft on the flywheel portion of the baler. I cant figure
out how it bolts up. Pictures would be greatly appreciated if
someone has the same baler with a kicker already mounted.

it should fit we used that baler and thrower for years to do haying. but i have no pictures of it.

This post was edited by chuck2015 on 05/23/2023 at 12:42 pm.

Trying to mount a new holland 70 thrower on a 273 baler.

Crookedcreekjerseys

Member

BarnyardEngineering

Well-known Member

SHALER

Member

chuck2015

Member

Similar threads