2023.05.08 "Extra" Pic

kcm.MN · May 8, 2023

Puzzle: https://jigex.com/NNLhx

db4600 · May 8, 2023

CJ-3A and early NH baler.

muleman51 · May 8, 2023

That sure beat a hayloader and loose hay. Very progressive.

Richard G. · May 8, 2023

Got a friend that used a belt pulley on the back of his old military jeep to pull his syrup mill last fall.

Barts Dad · May 8, 2023

Ive never seen a baler or combine with the pickup on the left side. Is that a real thing or did the negative get flipped when they printed the picture?

Deere Mark · May 8, 2023

New Holland model 76 baler with Wisconsin engine. Heavy baler and hay wagon could be too much for that Jeep unless on very flat ground.

Roger in Iowa · May 8, 2023

Believe it is a CJ2A. Does not have the high hood for the overhead valve engine.

db4600 · May 8, 2023

Im not versed in Jeeps and I figured my assumption was off. Did the CJ-3A have PTO?

Roger in Iowa · May 8, 2023

My post below is wrong about the higher hood. But it does look like it has a split windshield that the CJ-2A has.

Goose · May 8, 2023

I never saw an Allis Chalmers 5' pull type combine where the pickup WASN'T on the left side. And they were almost standard issue on farms after they came out.

I can recall at least 5 that I operated at various times.

Paul Janke · May 8, 2023

We had a 1965 Jeep CJ5 with a PTO. We used it to run a grinder mixer one winter.

Roger in Iowa · May 8, 2023

Pto was not factory installed. They could be installed on all 4WD up to and including CJ5. Google Jeep and see if you can find the video of what all could be attached. I know of; pto, 3 point hitch, trencher, mower and plow on 3 point.

I have had CJ2A, CJ5, Jeepster and Scrambler. Then made the move to '76 Bronco, big mistake. Then to '86 Power Ram, '01 Dodge. '08 Dodge, and now '19 Ram Classic.

db4600 · May 8, 2023

Early NH model that was in fact LH. I cant tell you the model number.

gene bender · May 9, 2023

The AC cOMBINES WERE ALL LEFTHAND

DoubleO7 · May 9, 2023

(quoted from post at 11:23:01 05/08/23) My post below is wrong about the higher hood. But it does look like it has a split windshield that the CJ-2A has.

CJ-3B was the high hood flat fender.

DoubleO7 · May 9, 2023

(quoted from post at 09:35:11 05/08/23) Ive never seen a baler or combine with the pickup on the left side. Is that a real thing or did the negative get flipped when they printed the picture?

The Jeep is still showing left hand drive.

710ltd2002 · May 10, 2023

Im surprised that keep is heavy enough to pull that load.
Dave

2023.05.08 "Extra" Pic

kcm.MN

Well-known Member

db4600

Well-known Member

muleman51

Member

Richard G.

Well-known Member

Barts Dad

Member

Deere Mark

Member

Roger in Iowa

Well-known Member

db4600

Well-known Member

Roger in Iowa

Well-known Member

Goose

Well-known Member

Paul Janke

Member

Roger in Iowa

Well-known Member

db4600

Well-known Member

gene bender

Well-known Member

DoubleO7

Well-known Member

DoubleO7

Well-known Member

710ltd2002

Member

Similar threads