SOLENOID PROB

NIK OWEN · Apr 17, 2023

ON ZTR MOWER, 651 KAWA, FINE ENGINE...31 HRSINTERMITTENT, FENDER MT, LOOKSLIKE OLD FORD TYPE...ANY WAY 2 TEST, OR
DISASSEMBLE? THANX, BE BLESSED, GRATEFUL, PREPARED...AINT THE SEAT SWITCH...

casecollectorsc · Apr 17, 2023

Does it work if you jump it at the solenoid with a screw driver?If so, something is not in position at the safety switches to let it work, such as steering levers not in neutral position.

Geo-TH,In · Apr 17, 2023

I was having solenoid issues with my GT275

The JD has a hydrostatic tranny. No mower deck or gears to worry about. I bought a PBNO off Amazon. Push button Normally open.
Wired it to the +12v and the other side of the PBNO to the solenoid. Solved my problem.
I think I was having problems with the switch connected to the brake pedal.

Run a jumper wire from the +12v to the small wire on your solenoid. If the solenoid works, you found your problem.
Get a PBNO. If it doesn't work, buy a new solenoid. d

SOLENOID PROB

NIK OWEN

Member

casecollectorsc

Well-known Member

Geo-TH,In

Well-known Member

Similar threads