Oil Filter Cartridge For 1999 Eicher Model 364NC Tractor

Rand21

New User
This message is a reply to an archived post by Carmel Hall on June 12, 2014 at 15:11:33.
The original subject was Oil Filter Cartridge For 1999 Eicher Model 364NC Tractor.

Hello,
I am trying to find information on where I can buy an oil filter for my 1999 Eicher 364nc. It is the cartridge type oil filter; dimensions are approximately: center hole .625 inches in diameter, total diameter 2.750 inches, and overall length of 5.375 inches. Currently, I have not had much luck and the the guy I spoke with at NAPA suggested trying to find the part online. I didn't get a reply from Taft manufacturing or eichertractorsgenuine.com. Any help would be greatly appreciated. Thank you
 
Hello rand welcome to YT! The 1st link is to the 2014 YT post you responded to. I did not have much luck trying to find something to match that OEM filter number. When I was viewing the Eicher web page in the 2nd link a chat window came up. You might try to see if that will get you a response to whether they still have service parts available for your machine and where you can get them in the states. That is assuming that is where you are from. Might take a bit of persistence on the chat, I am sure the first handful of replies it will give are auto responses and the chats number one purpose is to help sell equipment. Good luck! Hope you do not have a very large investment in this unit.
YT post on subject

Eicher Tractor web page
 
Thank you! The chatbot gave me some contact information for the company. I sent them an email. Hopefully, they still make the filters. Thanks again.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top