Update 9

jd2cyl1943 · Mar 4, 2023

Bad news first. I found a crack in my block.

And I got the seat more disassembled.

And I was able to get the mag blasted at a AirCorps Aviation shop.

Before

After

Phil9N3667 · Mar 4, 2023

Where is the crack on the block at??
Doesn't look like it's all the way
to the inside. If not, may not be an
issue.

rustred · Mar 4, 2023

Did u get the pistons out ?

Sleufoot · Mar 4, 2023

I have suggested to him via email that he should look for a complete tractor for a low cost and just take parts from that to
install on his tractor frame. Otherwise he's gonna have more time and money into this one then he should. Tom in MN

craigco · Mar 5, 2023

What is your block part number. I think I
have a block that I bought years ago for
a mid production B that I never used. You
can have it if will work just cover the
shipping. I'm in Colorado.

jd2cyl1943 · Mar 5, 2023

(quoted from post at 04:34:32 03/05/23) What is your block part number. I think I
have a block that I bought years ago for
a mid production B that I never used. You
can have it if will work just cover the
shipping. I'm in Colorado.

The block number is B 1783 R.

Pete in MD · Mar 5, 2023

B 1783 R is a casting number. The part number for your block is AB 2729 R.

jd2cyl1943 · Mar 5, 2023

Thanks I didn't know that.

craigco · Mar 5, 2023

The casting number on this block is
B1783. Should work if you want it. Some
very light rust spots at the bottom of
the cylinders but should clean up fine.
Don't know if it has been bored. Photos
don't want to load. Email me and I can
send some pics. [email protected]

Update 9

jd2cyl1943

Member

Phil9N3667

Well-known Member

rustred

Well-known Member

Sleufoot

Member

craigco

Member

jd2cyl1943

Member

Pete in MD

Well-known Member

jd2cyl1943

Member

craigco

Member

Similar threads