Update 7

jd2cyl1943 · Feb 27, 2023

Okay, here's the next update. I pulled out all the Sheetmetal to inspect it.

Here are some pics of the seat.

caterpillar guy · Feb 28, 2023

Cut the center out bigger than the bolt pattern, and weld in a new plate good to go. IF you drill the new plate before removing the old, you will have your seat set like it did before you cut the old rusted center out. Mark your sides of the new plate before cutting out at the inside of the lines.

Richard G. · Feb 28, 2023

Hood and grills look very straight.
I spent a lot of time on my 39 A grills using a hammer and a block of wood getting them straightened out.
Also spent a bunch of time on my 41 H grills using the same tools.

Gordy in MN · Feb 28, 2023

Give me some time but I may have a good foot plate you can have. Gordy in Mn

Update 7

jd2cyl1943

Member

caterpillar guy

Well-known Member

Richard G.

Well-known Member

Gordy in MN

Member

Similar threads