Farmall 560 hyd float position when using loader

jackson63 · Jan 19, 2023

I have a 1964 560 with a loader. Wondering if there is a float position on the control lever. Had a 656 years ago which did. I am either riding up over the snow or have the front wheels off the ground.

d282 · Jan 19, 2023

Yes, under the dash above the platform you will see one or two shafts sticking through with two flat sides for a wrench. The two settings are
roughly 2:00 and 4:00. Turn your control valve the other way, and you should have float.

used red MN · Jan 19, 2023

Not real family with the 60 series, but I think changing that valve puts it in one-way action not ..float.. if you really get down to it the two are different but It does essentially the same thing though.

Farmall 560 hyd float position when using loader

jackson63

New User

d282

Member

used red MN

Well-known Member

Similar threads