(800) 853-2651
SHOP NOW

Modified a battery Charger.

Geo-TH,In

Geo-TH,In

Well-known Member
I used these electrical connectors to remove the alligator clips
cvphoto143347.jpg

and attach a plug.
The plug fits the plugs I installed on my Kubota, Jubilee, Farmall and one riding mower. All batteries are hard to get alligator clips on.
cvphoto143348.jpg

I made the electrical connectors senior citizen old timers proof so I can't get the polarity wrong.
All parts were purchased at a flea market or you can get them off Amazon or ebay.
 
George. Im missing something. Not saying your description is wrong either. What terminal or device or connector are you using on the battery posts. I like your idea a lot because I have exact same connection issues for charging etc Thanks. Wingnut
 
I didn't show How I connected the flat plug wires to the battery post.
I use round electrical connections and put them under the nut on the battery clamp.

What I'm showing is How I remove the alligators and attach the 2 wire flat plug.
 
Looks like pretty light weight wire for a charger unless it is just a maintainer 12 gage wire would be small if you need to transfer a lot of amps for starting. That's what the wire looks like
 
My newest small charger came with a pigtail connector that I put on my motorcycle, as the battery is pretty inaccessible. It also came with a lighter plug, and my 4-wheeler had a lighter socket, so I can just plug into that to charge the battery.
 
You must log in or register to reply here.

Similar threads

Geo-TH,In
Idiot proof wiring
Replies
19
Views
4K
Jim.ME
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top