Ted in NE-OH
Well-known Member
What is a good source for a muffler for a Allis chalmers 720 garden tractor with an Onan CCKB engine?
- Thread starter Ted in NE-OH
- Start date
used red MN
Well-known Member
- Location
- Coon Rapids, MN
I suspect you are not wanting an original replacement for $480! ; > ) Not sure how that link will show up, if all is right click circle 26.
Jacks parts
Jacks parts
My Onan B48G in my 1981 vintage 982 IH Cub Cadet has two mufflers, one for each cylinder, they run vertically in front of the two cylinders. Good chance they would bolt to your engine. They do a good job of quieting the engine.
The mufflers for the Onan engines used on IH 982's is not a high volume application, maybe your local Deere dealer might have something, they used loads and loads of Onan engines. Or maybe your local welding supply house could get something, lots of portable welder/Generators were Onan powered.
I'm thinking my 982 may have got new mufflers installed right before I bought it. It had 4 new tires, new paint, engine completely overhauled except for Onan's poor excuse of a governor, and a fairly new but cheap seat. If I had to replace those mufflers I'd build my own. Unless you have access to scraps of stainless tubing, or sheet, and a roller, fabbing a stainless muffler, actually two, would be costly and time consuming.
The mufflers for the Onan engines used on IH 982's is not a high volume application, maybe your local Deere dealer might have something, they used loads and loads of Onan engines. Or maybe your local welding supply house could get something, lots of portable welder/Generators were Onan powered.
I'm thinking my 982 may have got new mufflers installed right before I bought it. It had 4 new tires, new paint, engine completely overhauled except for Onan's poor excuse of a governor, and a fairly new but cheap seat. If I had to replace those mufflers I'd build my own. Unless you have access to scraps of stainless tubing, or sheet, and a roller, fabbing a stainless muffler, actually two, would be costly and time consuming.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy