rusty6
Well-known Member
- Location
- East central Sask.
Started this job early this week working a bit each day. Still did not hit my modest target of replacing one injector a day in the 2140 John Deere. I'm up to 3 removed and 2 installed. Not too bad so far and I'm learning a bit as I go how to get the old ones out without damaging anything. Somebody commented that I might regret putting A&I injectors in the tractor as their parts are junk. I'll admit they are cheap, about 1/3 the price of the same injector out of the jd parts book but I guess time will tell how they work. I've had good luck with all the other cheap A&I parts I've bought over the years.
Some of you will find it hard to believe I've turned on the furnace in the shop when I'm working there. Temp not much above freezing outside. Some video of the job here.
3 Injectors Out
Some of you will find it hard to believe I've turned on the furnace in the shop when I'm working there. Temp not much above freezing outside. Some video of the job here.
3 Injectors Out
