Lahman little dipper tilt cylinder

tomas4fifty8

New User
I recently got our Skid steer (M20 more than likely) up and going motor was tuned GX670 Honda 24hp changed hydraulic fluid and filter but I am wanting to reseal the bucket tilt cylinder as it leaks. The burning question is does anyone have a source I can go to to identify what kit I need for the cylinder for new seals. Thanks in advance.

This post was edited by tomas4fifty8 on 09/07/2022 at 06:00 pm.
 
I would try Baum Hydraulics out of of Omaha, 1 800-228-9222,But you will have to take it apart to give him the dimensions/ Ask for Jerry!
 
H&D Distributors in Dallas will match the old seals, fill the order, mail them
back.

They even supply a free prepaid mailing label, just box them up, send any
information you can with caliper measurements if possible, and quantities.

They have extensive inventory and knowledgeable personnel.

No affiliation, just a satisfied customer!
H&D Distributors
 
(quoted from post at 19:18:11 09/07/22) I would try Baum Hydraulics out of of Omaha, 1 800-228-9222,But you will have to take it apart to give him the dimensions/ Ask for Jerry!
What are the chances of this I make a post looking for parts and information and Omaha is mentioned I live 89 miles west of there . Thanks for the information I will look them up
 
(quoted from post at 04:54:10 09/08/22) thank you sir I will check these guys out as well

Did you get your cylinder seal fixed? I just finished getting my Little Dipper working (new engine, hydraulic drive motor, etc.) only to find that I have a leak in my tilt cylinder. I found someone that will fix it for me locally (Central Iowa) but was hoping to potentially do it myself if I could find a seal kit. Any suggestions?

Thanks!

This post was edited by chadgus on 10/17/2022 at 05:02 pm.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top