Hesston 1090

Bbrooks8159 · Aug 27, 2022

I am working with a Hesston 1090. Had to remove the reel and destroyed the end support bearings to do so. With that said i looked on the agco partsbook website and found two bearing numbers. #712471 for the left side and # 713198 for the right side. It appears i may have found a cross to the right side listed as "Y713198" but am not 100% sure. Although partsbook shows the # and the part is doesn't show it as being something i can order and does not show an updated #.
Does anyone have any updated #s for these bearings or a source to get them ?

Thanks in advance

Steve@Advance · Aug 27, 2022

What kind of bearings are they?

Most manufacturers build around stock readily available bearings. Have you
tried a bearing supply?

used red MN · Aug 27, 2022

Sorry I have no idea what kind of experience you have
with ag machine repair. Does it look like the example
bearing in the link and the outer race is clamped in two
stamped steel holders by usually 3 or 4 bolts?
Common item any implement dealer, farm store or
even most auto parts stores in rural areas carry them.
Sized mainly by shaft diameter. FYI the outer ring or
collar is turned by driving with a punch then the Allen
Lock screw is tightened.
Example

Bbrooks8159 · Sep 1, 2022

Yes it does look like that bearing.

I ended up going to a "farm depot" ag store and the parts guy was able to find updated #s for the old superseded numbers.

In case someone in the future is looking the reel bearing #s for the Hesston 1090 are as follows

71306662

Y713198

Thanks for everyone's help

Hesston 1090

Bbrooks8159

New User

Steve@Advance

Well-known Member

used red MN

Well-known Member

Bbrooks8159

New User

Similar threads