856 international hydraulic remotes

I have a 856 the hydraulic remotes are not showing any pressure on the gauge. I took the top link cover off and started the tractor the right side is pouring oil out somewhere. I then took the cover off up on top under the seat. I can see the oil is under pressure but can't see with any mirror where it is coming from or what o ring is bad. I am not sure what I should take apart or replace. I was wondering if the cushion valve would make this happen.
 
There will always be oil from above. Try letting the three point hitch down. If it comes up to high and puts the system on high pressure the remotes will not work.
 
Like Glen said if the 3pt lever is to high up the quadrant it will dump all the oil and not flow to the remotes. I can't remember if it is the draft control lever or the lift lever. I never use the 3 pt so the reason.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top