Case 400 super fuel lines

Dennis Gaede · Aug 2, 2022

I have a 1957 Case 400 super that I be need help with. I had to replace the injection pump and I didn't take a picture of the fuel lines before I removed the old one. I need a picture or diagram of the fuel lines by the primary filter and the pump. Thanks for anything you have that can help.bbb

jon f mn · Aug 2, 2022

This should help.

used red MN · Aug 2, 2022

Jons photo should have been a little closer and with a little more light. Probably the best he could do. The attached parts diagram gives you the ID of tubes 1 and 3, I would guess they must have been the last 2 still available from Case. I think with that and the diagram you will be able to figure it out. Pretty sure each one will only fit in on position. Also pretty sure they should follow the 1 3 4 2 firing order around the pump head but I cannot tell you which direction, maybe Jon can. If you click the diagram it will expand like a picture. Beware of the adds on that site.
Case 400 inj,

Dennis Gaede · Aug 2, 2022

Thanks guys appreciate the info. I was referring to the lines that goes from the injection pump to the filter that sits below it. Jon picture isn't quite clear enough for these old eyes to decipher.

used red MN · Aug 2, 2022

Hello Dennis, welcome to YT. Please excuse my oops, did not read the post all the way through. This will likely be more helpful.
Filter lines

RWT · Aug 2, 2022

Here it is again. Don't know if it helps.

RT

Case 400 super fuel lines

Dennis Gaede

New User

jon f mn

Well-known Member

used red MN

Well-known Member

Dennis Gaede

New User

used red MN

Well-known Member

RWT

Member

Similar threads